产品中心
您现在的位置:首页产品中心产品分类测量仪器系列电源自动测试系统 > CP9000 电源自动测试系统
  • 产品名称: CP9000 电源自动测试系统
  • 产品型号: CP9000
  • 上架时间: 2014-09-28
  • 应用范围: 应用于AC/DC及DC/DC的适配器、充电器、开关电源以及LED驱动电源等电源产品在线综合性能测试
  • 外观尺寸:
  • 卓越功能: 开放性架构软件平台,支援含有GPIB/RS-232或RS-485 ;测试项目、测试程序、测试报告、统计分析报表等编辑功能 ;主从式控制模式,可一次测试多台单组输出的电源供应器 ;

 
应用范围
小图标 应用于AC/DC及DC/DC的适配器、充电器、开关电源以及LED驱动电源等电源产品在线综合性能测试
 
卓越功能
小图标 开放性架构软件平台,支援含有GPIB/RS-232或RS-485
小图标 测试项目、测试程序、测试报告、统计分析报表等编辑功能
小图标 主从式控制模式,可一次测试多台单组输出的电源供应器
小图标 支援Bar Code Reader ,测试命令编辑,帮助改善测试速度
小图标 可以给任何电源供应器测试应用的测试项目编辑能力
小图标 广泛的模组化硬件以提供高准确及重复量测
小图标 由系统预设测试项目,可提高测试生产率
小图标 图形化界面Windows 98/NT/2000以上的作业环境
小图标 生成Excel,保存测试数据,含生产数量,不良率,柏拉图,CPK值等数据
小图标 双治具左右自动切换测试功能
 
性能参数
 

Test Name

Parameter and Range

Accuracy

START UP 启动

Inrush current: 0 – 83Apk(浪涌电流)
Startup time: 0 to 32767msec.(开机时间)
Output voltage overshoot: 0 – 500Vpk
Rise time: 0 to 32767msec.(上升时间)

±1% (reading + range)
±1ms
±1% (reading + range)
±1ms

UVLO(Under voltage or over voltage) 欠压 过压

Functional test only, Pass/Fail

N/A

IDLE 待机

Standby input power: 0 – 5/25/250/1250W
Standby input current: 0 – 0.1/0.5/5/25Apk
Input voltage: 30 – 280V*Note 2

±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)

STANDARD CV
(Constant Current and Constant Resistance load) 恒压

CC mode: 0 – 3/15 A
CR mode: 0.1 – 50Ohm
Input voltage: 30 – 300Vrms *Note 1
Input current: 0 – 0.1/0.5/5/25Apk
Input power: 0 – 5/25/250/1250W
Power factor 0 – 1.0
Output voltage 0 – 15/500Vdc
Output current 0 – 3/15Adc
Efficiency: 0 – 100%
Ripple/Noise 200kHz: 0 – 500mV
Ripple/Noise 20MHz: 0 – 500mV

±0.15% (setting + range)
±0.3% (setting + range) *Note 2
±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)
±0.2% (reading + range)
±0.05% (reading + range)
±0.1% (reading + range)
±0.25% (reading + range)
±2% (reading + 5mV)
±2% (reading + 5mV)

STANDARD CC
(Constant Voltage and Constant Resistance load) 恒流

CV mode: 0 – 15/500V
CR mode: 0.1 – 50Ohm
Input voltage: 30 – 300Vrms *Note 1
Input current: 0 – 0.1/0.5/5/25Apk
Input power: 0 – 5/25/250/1250W
Power factor 0 – 1.0
Output voltage 0 – 15/500Vdc
Output current 0 – 15Adc
Efficiency: 0 – 100%

±0.15% (setting + range)
±0.3% (setting + range) *Note 3
±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)
±0.2% (reading + range)
±0.05% (reading + range)
±0.1% (reading + range)
±0.25% (reading + range)

LED Driver Test (LED Load)
LED驱动

Input voltage: 30 – 300 Vrms *Note 1
Input current: 0 – 5/25Apk
Input power: 0 – 250/1250W
Power factor 0 – 1.0
Output average current reading: 0 – 15Adc
Output average voltage reading: 0 – 500Vdc
Output pulsed current reading (TRIAC, PWM)

±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)
±0.2% (reading + range)
±0.1% (reading + range) *Note 4
±0.05% (reading + range) *Note 4
±0.5% (reading + range)

SHORT CIRCUIT
短路

Input voltage: 30 – 300 Vrms *Note 1
Input current: 0 – 5/25Apk
Input power: 0 – 250/1250W
Power factor 0 – 1.0
Output average Current: 0 – 15Adc

±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)
±0.2% (reading + range)
±0.2% (reading + range) *Note 4

OVER CURRENT
过流

Current trip point: 0 – 3/15Adc
Trip point voltage: 0 – 15/500Vdc
Wait time >= 10msec.
Wait time < 10msec.
Voltage before trip point: 0 – 15/500Vdc
Current before trip point: 0 – 3/15Adc

±0.1% (reading + range)

±0.05% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)
±0.1% (reading + range)

OVER VOLTAGE
过压

OV trip point: 0 – 500V

±0.1% (reading + range)

LINE REGULATION
线性调整

Voltage regulation: 0 – 100%

±0.1% (reading + range)

LOAD REGULATION
负载调整

Voltage regulation: 0 – 100%

±0.1% (reading + range)

AVERAGE EFFICIENCY
平均效率

Efficiency: 0 – 100%

±0.25% (reading + range)

Dynamic load
动态负载

Over shoot voltage: 0 – 15/500Vdc
Under shoot voltage: 0 – 15/500Vdc

±0.05% (reading + range)
±0.05% (reading + range)

POWER DOWN
关机

Holdup time: 0 – 65535 msec.
Input voltage: 30 – 300Vrms *Note 1
Output current 0 – 3/15Adc
Output voltage overshoot: 0 – 500Vpk

±1ms
±0.1% (reading + range)
±0.1% (reading + range)
±1% (reading + range)

Global Setting
全面设定

Load on voltage: 0 – 500Vdc
Wait time: 0 – 32767msec.
Nominal output voltage: 0 – 500Vdc
Nominal output current: 0 – 15Adc

±1%  (reading + range)
±1ms
±1% (reading + range)
±1% (reading + range)